SQC485I — RF Test Console
NCC fixed-frequency (定频) measurement control for the SQC485Iv2 LoRa test firmware (HT-CT62 / SX1262). USB-C · 115200.
① Certified config — 922.0 MHz / BW500 / SF9 / +22 dBm
Sets FREQ 922.0M, BW 500, SF 9, PWR 22, then starts continuous TX. Use the spectrum analyzer to read power / OBW / spurious.
② Band sweep (low / mid / high, cert modem) — auto CW
modulated:
③ Manual parameters
MHz
kHz
dBm
Bandwidth is locked to 500 kHz — the certified DTS configuration.
④ Transmit control
ms (0=∞)
⑤ BLE 2.4 GHz (DTM test packets)
dBm (≤21)
DTM = continuous test packets. Channel n = 2402 + 2·n MHz. Default +9 dBm (certified value).
⑥ Console
Desktop Chrome / Edge only (Web Serial). Flash the test firmware first at flasher.siliqs.net. · Siliqs / Guinea Technology